2015 Furukawa HCR1500-ED II Drill Rig
Sold
Description
2015 Furukawa HCR1500-ED II Drill Rig
Crawler Mounted
1730+ machine hours and 617+ drifter hours.
S/N 1454407
OPTIONS ON MACHINE
CMI 3 ANGLE INDICATOR
REAR BUMPER
WATER SUPPRESSION
WEBASTO COOLANT HEATER
SET UP FOR T51 MALE FEMALE
Specifications for the HCR1500-ED II / HCR1500-D20 II:
Weight & dimensions
US Standard
Metric
Operating weight with fuel/oil (with ROPS/FOPS cab if applicable)
39,286 lb / 40,616 lb
17,820 kg / 18,420 kg
Overall length
32'-10" / 33'-5.5"
10,010 mm / 10,200 mm
Ground contact length
9'-1" / 9'-5"
2,780 mm / 2,865 mm
Overall width with pre-cleaner
12'-2" / 12'-8"
3,720 mm / 3,860 mm
Overall width
7'-10.5"
2,400 mm
Width of shoe
13"
330 mm
Overall height shipping
11' / 11'-2"
3325 mm / 3,400 mm
Drifter
Model
HD715 II
Weight
551 lb
250 kg
Impact rate
2,250 - 2,500 bmp
Number of rotations
0 - 150 rpm
Undercarriage
Ground clearance
20.4" / 19.2"
515 mm / 495 mm
Oscillating angle
±7.5° deg
Travel speed
0 - 2.6 mph
0 - 4.2 km/h
Max grade of hill climb
57.7 (30°) %
Engine
Make/model
CATERPILLAR® / C9
Type
Turbocharged and air to air after cooled diesel, direct fuel injection, electronic governor.
Rated output
348hp / 2200rpm
260kw / 2200rpm
Meets Tier III and EU stage-3 Low-emission, low fuel consumption Tier III Caterpillar® engine meets major exhaust emissions regulations in US and Europe. Net usable output available at flywheel of the installed engine with all the standard accessories. SAEJ1349, SAEJ1995 conditions.
Piston displacement
2.3 gal
8.8 liter
Fuel tank capacity
166 gal
630 liter
Hydraulic pump
Type
2-variable displacement axial piston pumps; largest for travel, impact and feed, smaller for drifter rotation. 3-gear pumps for cooling and dust collector, boom and rod changer.
Hydraulic oil tank capacity
63 gal
240 liter
SpecificationsHCR1500-ED II / HCR1500-D20 II
US Standard
Metric
Compressor
AIRMAN®
Model
PDS290-S15B
Free air delivery
476.4 CFM
13.5 m3/min
Working air pressure
149 psi
1.03 MPa
Boom
Model
JE326-142 / JE325-141
Lift angle (up-down)
45° - 20° / 45° - 25°
Swing angle (right-left)
38° - 7° / 35° - 7°
Extension length
2.9 ft
900 mm
Guide shell
Model
GH885-41 / GH830-51
Length
26'-2" / 33'-5"
8,000 mm / 10,200 mm
Feed length
26'-2" / 33'-5"
4,700 mm / 6,763 mm
Swing angle (right-left)
38° - 38° / 25° - 90°
Tilt angle
170°
Maximum pulling force
6,969 lbs
31kN
Dust collector
Suction capacity
1,400 CFM
40 m3/min
Number of filter
6
Rod arrangement
Type
Rod changer
Number of rods
6 + 1 / 4 + 1 (starter rod)
Bit and rod
Bit diameter
3.5" - 5"
89 mm - 127 mm
Type of bit
Cross, Button, Spike
Rod size
51R
Rod length
12' / 20'
3,660 mm / 6,100 mm
Starter rod length
14' / 20'
4,300 mm / 6,100 mm
Available in Mifflinburg, PA yard USA
(East West Drilling is a distributor)
Leading technology for BLASTHOLE DRILLS
HYDRAULIC BREAKERS and RELATED attachments
In 1875 Ichibei Furukawa founded Furukawa Co., LTD. to mine and smelt copper
Today, Furukawa Rock Drill USA is a leading manufacturer of rock drills and attachments for Skid Steer, Mini Excavators, Backhoes and Excavators
FRD USA Attachment Division (formerly marketed as Kent Demolition Tool) is a leading brand throughout North and Central America
FRD USA Rock Drill Division offers a complete line of advanced drills and accessories for construction and quarry sites
Contact us by email or Phone: 570-966-7312 for your Next New Drill, Service, or Parts Order in the state of PA, OH, VA, NJ, MD, DC only.
Outside Sales Tony Morell (East PA, NJ) mobile: 570-780-9325 or Reggie Keller (West PA, OH, MD, VA, DC) mobile: 570-217-7636
East West Drilling, Inc. is a licensed distributor for the state of Pennsylvania, USA
Contact Us for more information, specs, and prices on each drill model
We can offer Drill Pipe, DTH Hammers & Bits, Parts, and Tooling as needed
Crawler Mounted
1730+ machine hours and 617+ drifter hours.
S/N 1454407
OPTIONS ON MACHINE
CMI 3 ANGLE INDICATOR
REAR BUMPER
WATER SUPPRESSION
WEBASTO COOLANT HEATER
SET UP FOR T51 MALE FEMALE
Specifications for the HCR1500-ED II / HCR1500-D20 II:
Weight & dimensions
US Standard
Metric
Operating weight with fuel/oil (with ROPS/FOPS cab if applicable)
39,286 lb / 40,616 lb
17,820 kg / 18,420 kg
Overall length
32'-10" / 33'-5.5"
10,010 mm / 10,200 mm
Ground contact length
9'-1" / 9'-5"
2,780 mm / 2,865 mm
Overall width with pre-cleaner
12'-2" / 12'-8"
3,720 mm / 3,860 mm
Overall width
7'-10.5"
2,400 mm
Width of shoe
13"
330 mm
Overall height shipping
11' / 11'-2"
3325 mm / 3,400 mm
Drifter
Model
HD715 II
Weight
551 lb
250 kg
Impact rate
2,250 - 2,500 bmp
Number of rotations
0 - 150 rpm
Undercarriage
Ground clearance
20.4" / 19.2"
515 mm / 495 mm
Oscillating angle
±7.5° deg
Travel speed
0 - 2.6 mph
0 - 4.2 km/h
Max grade of hill climb
57.7 (30°) %
Engine
Make/model
CATERPILLAR® / C9
Type
Turbocharged and air to air after cooled diesel, direct fuel injection, electronic governor.
Rated output
348hp / 2200rpm
260kw / 2200rpm
Meets Tier III and EU stage-3 Low-emission, low fuel consumption Tier III Caterpillar® engine meets major exhaust emissions regulations in US and Europe. Net usable output available at flywheel of the installed engine with all the standard accessories. SAEJ1349, SAEJ1995 conditions.
Piston displacement
2.3 gal
8.8 liter
Fuel tank capacity
166 gal
630 liter
Hydraulic pump
Type
2-variable displacement axial piston pumps; largest for travel, impact and feed, smaller for drifter rotation. 3-gear pumps for cooling and dust collector, boom and rod changer.
Hydraulic oil tank capacity
63 gal
240 liter
SpecificationsHCR1500-ED II / HCR1500-D20 II
US Standard
Metric
Compressor
AIRMAN®
Model
PDS290-S15B
Free air delivery
476.4 CFM
13.5 m3/min
Working air pressure
149 psi
1.03 MPa
Boom
Model
JE326-142 / JE325-141
Lift angle (up-down)
45° - 20° / 45° - 25°
Swing angle (right-left)
38° - 7° / 35° - 7°
Extension length
2.9 ft
900 mm
Guide shell
Model
GH885-41 / GH830-51
Length
26'-2" / 33'-5"
8,000 mm / 10,200 mm
Feed length
26'-2" / 33'-5"
4,700 mm / 6,763 mm
Swing angle (right-left)
38° - 38° / 25° - 90°
Tilt angle
170°
Maximum pulling force
6,969 lbs
31kN
Dust collector
Suction capacity
1,400 CFM
40 m3/min
Number of filter
6
Rod arrangement
Type
Rod changer
Number of rods
6 + 1 / 4 + 1 (starter rod)
Bit and rod
Bit diameter
3.5" - 5"
89 mm - 127 mm
Type of bit
Cross, Button, Spike
Rod size
51R
Rod length
12' / 20'
3,660 mm / 6,100 mm
Starter rod length
14' / 20'
4,300 mm / 6,100 mm
Available in Mifflinburg, PA yard USA
(East West Drilling is a distributor)
Leading technology for BLASTHOLE DRILLS
HYDRAULIC BREAKERS and RELATED attachments
In 1875 Ichibei Furukawa founded Furukawa Co., LTD. to mine and smelt copper
Today, Furukawa Rock Drill USA is a leading manufacturer of rock drills and attachments for Skid Steer, Mini Excavators, Backhoes and Excavators
FRD USA Attachment Division (formerly marketed as Kent Demolition Tool) is a leading brand throughout North and Central America
FRD USA Rock Drill Division offers a complete line of advanced drills and accessories for construction and quarry sites
Contact us by email or Phone: 570-966-7312 for your Next New Drill, Service, or Parts Order in the state of PA, OH, VA, NJ, MD, DC only.
Outside Sales Tony Morell (East PA, NJ) mobile: 570-780-9325 or Reggie Keller (West PA, OH, MD, VA, DC) mobile: 570-217-7636
East West Drilling, Inc. is a licensed distributor for the state of Pennsylvania, USA
Contact Us for more information, specs, and prices on each drill model
We can offer Drill Pipe, DTH Hammers & Bits, Parts, and Tooling as needed
Specifications
| Manufacturer | Furukawa |
| Model | HCR1500-ED II Drill Rig |
| Year | 2015 |
| Condition | Used |
| Stock Number | 12375 |
| Status | Sold |