1987 CME Drill 55 Drill Rig
Sold
Description
Sold and will be shipped once finished
1987 CME 55 Drill Rig
Auto Hammer
Moyno pump
Cathead
GM Gas deck engine 300 HP
Hydraulic Leveling Jacks
Has a Slide Base (slides in and out)
Set up for coring or auger drilling
Drill is in good condition
Newer Paint
Mounted on 1994 International T444E Truck (clear title)
Key switch on drill may have a short
Diesel Engine
Water Tank was converted to toolbox by cutting 2 small doors into the end, but could be welded over to make water tank again.
Note: Truck is in working order but needs a couple tires and will need a clutch job in future. Deck battery needs stored inside, may need replace in the near future)
Note: No Wiggle Tail (Tail is stationary, does not slide side to side)
Installed new batteries as needed, both engines start and run nicely
Wheelbase 14’ 2” | Oal 22’ 10” | Height 10 2
Located in Mifflinburg, PA USA
1987 CME 55 Drill Rig
Auto Hammer
Moyno pump
Cathead
GM Gas deck engine 300 HP
Hydraulic Leveling Jacks
Has a Slide Base (slides in and out)
Set up for coring or auger drilling
Drill is in good condition
Newer Paint
Mounted on 1994 International T444E Truck (clear title)
Key switch on drill may have a short
Diesel Engine
Water Tank was converted to toolbox by cutting 2 small doors into the end, but could be welded over to make water tank again.
Note: Truck is in working order but needs a couple tires and will need a clutch job in future. Deck battery needs stored inside, may need replace in the near future)
Note: No Wiggle Tail (Tail is stationary, does not slide side to side)
Installed new batteries as needed, both engines start and run nicely
Wheelbase 14’ 2” | Oal 22’ 10” | Height 10 2
Located in Mifflinburg, PA USA
Specifications
| Manufacturer | CME Drill |
| Model | 55 Drill Rig |
| Year | 1987 |
| Condition | Used |
| Serial Number | 1HTSLABM7SH636721 |
| Stock Number | 13495 |
| Status | Sold |